UV curing transformer

◆ ProductIntroduction
 UV curing transformer is the use ofelectromagnetic induction principle, the use of magnetic leakage boost modedevelopment, specifically for the UV lamp power supply dry-type transformers.

This product is imported silicon steel andvacuum technology, reducing their own work for noise, improve the quality ofthe product stability, extended its service life. This product is widely usedin paper, PVC, color printing silk screen, furniture, wood flooring, decorativematerials, plastic products, tin cans printing and related Industry UV coating,UV curing, PS copy, UV spray and other fields, can make the printing ink layerafter the rapid curing. It is currently more environmentally friendly inkdrying method. It can be in the transient high voltage excitation to UV lamp
And the ultraviolet light having a main peak of about 360 nm was emitted andirradiated with an acrylic resin crosslinked and solidified for inducing theink on the ink layer. UV curing transformer models are vertical, horizontal,two-coil and three-coil and four-coil, power from 3KW-25KW. Lamps, UV curingtransformers, UV capacitors must be matched to each other. UV curingtransformer selection must match the power of the UV lamp match, that is, thetransformer must have sufficient output voltage to ensure that the UV
Light can work at full power. If the output voltage is too high will burn thelamp; the output voltage is too low, the lamp can not work full power, so thatthe UV output intensity is insufficient.
◆ Product Features  
 The product uses magnetic leakage boosting principle, stable performance,fast start, low noise, low heat, energy saving features. UV equipment can beimported with supporting the use of UV is a special magnetic flux leakagetransformers, models are vertical, horizontal and imitation import. The use ofimported silicon steel sheet, scientific design, strict production process,with stable performance, high efficiency and low consumption characteristics,UV light source must be configured with the power supply.
◆ Attention
1. The transformer shall not overload operation.
2. Resistive load, load capacity can be done to do 1.2-1.5 times themagnification optional matching transformer. Inductive load can be selectedaccording to the device start mode, such as the motor class can be started fromthe servo amplifier can be amplified 1.2 times, the inverter starts 2-3 timesto enlarge with the start directly to the rated capacity of 3-4 times toenlarge matching transformer.
3. All cable specifications in line with national standard GB13028-91requirements, and must be in good contact.
4. The transformer should be installed in a well-ventilated place,non-conductive part of the body must be grounded, and must be in good contact.
5. The use of transformer conditions have changed, or transformers have specialrequirements, please specify when ordering.
6. The use of UV is not found, please stop checking the UV capacitor is bad, ifthe capacitor will continue to use bad will burn the transformer.
7. UV curing transformer must be matched with the matching power of the UV lamp(such as 5.6KW UV curing transformer, can only unworthy 5.6KW UV lamp, lamppower with large, UV power of less than, UV lamp With small will damage thelamp), the corresponding supporting the use of capacitors.
8. Before wiring to see the input terminals and output terminals of theconnection.